Minelab X-Terra 705 Instrukcja Obsługi Pobierz pdf (Strona 29)

x-terra 705 specifications

Transmission Single Frequency Sine Wave

Technology VFLEX

Coil Standard 9” Concentric 7.5 kHz

Visual Display Transective LCD with Backlight

Audio Internal Speaker and Headphone Output

Search Mode Motion Detector

Discrimination Multi-Segment Accept/Reject/Iron Mask

Batteries (Not Included) 4 x AA Alkaline/Carbon/Lithium or NiMH/NiCad

Padded Armrest 4 Position Adjustable with Stand & Armrest

Length Extended 56” (1.42m)

Length Collapsed 48” (1.22m)

Weight (Excluding Batteries) 2.9lbs (1.3kg)

Optional Accessories Headphones, Skidplates, Environmental Cover,

Accessory Coils, Short Shaft

Model Features

Coil Frequency Options 3 (Standard 7.5 kHz, Low 3kHz, High 18.75 kHz)

Detecting Modes Coin & Treasure, Prospecting

Discrimination Patterns 4 + All Metal

Iron Mask Discrimination (Prospecting Mode) 0 to 20

All Metal Shortcut

Discrimination Scale (Segments) 28

Ferrous 4

Nonferrous 24

Numeric Range (Target ID Numbers) Steps of 2 (-8, -4, -2, 0, 2, 4, 6, 8, 10, 12,

14, 16, 18, 20, 22, 24, 26, 28, 30, 32,

34, 36, 38, 40, 42, 44, 46, 48)

Depth Indication Icons 5

Sensitivity Adjustment Manual, 1 to 30

Noise Cancel Channels Auto or 5 Manual (-2, -1, 0, 1, 2)

Ground Balance Adjustment Manual 1-90, Auto, Tracking, Beach

Tracking Ground Balance Oset –15 to 15

Pinpoint (Audio & Visual) 2 Modes (Auto and Sizing)

Volume Adjustment 0 to 30

Threshold Adjustment –5 to 25

Audio Tones for Target IDs 1, 2, 3, 4, Multiple

Low Battery Audio Alarm

User Interface Keys 11 + Power

LCD Icons 82

Shaft Colour Black

In the interests of product improvement, Minelab reserves the right to make changes without notice.

care of your x-terra 705

The X-Terra 705 is a high quality electronic instrument, nely

engineered and packaged in a durable housing. Taking proper

care of your X-Terra 705 is common sense.

The storage temperature of the

X-Terra 705 is –4˚F to 149˚F (–20˚C to +65˚C)

and the operating temperature is 32˚F

to 113˚F (0˚C to 45˚C). Do not leave the

detector in excessive heat or cold for longer

than necessary.

The coil can be submerged in water up

to 20” (0.5m), but the control box is not

waterproof. Although it has been designed

to be weather resistant, it is advisable to

protect the control box in wet conditions.

A protective control box cover is available

(Accessories, p. 52).

Never allow the detector to come into

contact with gasoline or other petroleum-

based liquids.

Keep the detector clean and dry and avoid

getting sand and grit into the shafts or

fastenings (e.g. yoke, twistlocks). Do not use

solvents to clean the detector. Use a damp

cloth with mild soap detergent.

Always remember to turn the detector o

before changing coils.

Coils from other models of Minelab detectors

will not function with the X-Terra 705

(Accessories, p. 52).

Only VFLEX compatible coils will operate

correctly with the X-Terra detectors (Coil

Identication, p. 48).

The display window may be prone to

scratching or damage if not treated with

care. A protective control box cover is

available (Accessories, p. 52).

Ensure that the coil cable is in good

condition and not subject to undue stress,

particularly where it is connected to the coil.

Old, at, or faulty batteries can cause

many problems with the detector, through

electrolyte leakage. Take the batteries out if

the detector will be unused for more than 1

week. Ensure that only good quality batteries

are used and that they are replaced when

the low battery signal sounds.

Do not use rechargeable Lithium Ion

batteries as their voltage is too high. Non-

rechargeable Lithium batteries may be used.

1 2 ... 24 25 26 27 28 29 30 31

Komentarze do niniejszej Instrukcji

Brak uwag

Minelab X-Terra 705 Instrukcja Obsługi Strona 29

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Minelab X-Terra 705