Minelab Safari Instrukcja Obsługi Pobierz pdf (Strona 32)

30

Discrimination

Discrimination (Accept/Reject) Scale

When a target is detected, an ID number

appears on the left hand side of the

screen and a bar and cursor appear in the

Discrimination scale along the bottom of the

screen in the Graphic Identication Bar. In

Coin and Coin & Jewellery Modes a Target

Icon also appears on the right hand side of

the screen.

The location of the target cursor corresponds

to the discrimination rating or ID number of

the object.

When an object is detected, the target cursor

will momentarily ash.

On the Graphic Identication Bar the black

area represents rejected target IDs and the

clear area represents accepted target IDs.

Interpreting target responses

The Target ID Range has 51 numbers

from –10 to +40.

Ferrous (Iron) objects will have IDs

in –10 to –1 range.

Nonferrous (non-iron) objects will have IDs

in the 0 to +40 range.

Objects with higher Conductivity will have

higher IDs.

To Modify the Discrimination Pattern:

The Discrimination Pattern of a factory

preset mode can be modied and saved as a

personal setting, so that your own preferred

Discrimination Pattern is ready for use any

time you wish.

The icon will be displayed on the screen

to indicate that a mode has been temporarily

modied.

There are three methods of modifying the

Discrimination Pattern.

Method 1 –

To reject a specic target/object:

1 Wave the coil over the object. The detector

will move the cursor to indicate the object’s

position on the scale, and the target’s ID

number will appear on the screen.

2 Press the Accept/Reject button to reject the

object’s ID.

3 Wave the coil over the target and check

that it is being rejected. If it still produces

a response, reject its new ID by pressing

Accept/Reject a second time.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag