Minelab Musketeer ADVANTAGE Instrukcja Obsługi Pobierz pdf (Strona 9)

Instruction Manual Page 9

Hipmount

Hipmounting is an alternative to mounting the detector on the shaft and it

significantly reduces the strain on your arm, enabling you to search for longer

periods of time without undue fatigue.

To hipmount the detector you will be required to purchase the hipmount bag

from your dealer.

a) Check that there are charged batteries in

the control box (11).

b) Put the control box into the hipmount bag

(13) as shown in Fig 5

c) Place the hipmount bag in your preferred

working configuration. The hipmount bag

can be worn on the belt, or over the

shoulder.

d) Wind about 5 turns of the cable around the

shaft. This will reduce the amount of

excess cable.

NOTE:

Leave enough slack at the bottom of the cable near the coil to adjust the

coil position without straining the coil cable.

e) Use Velcro tabs to secure the cable in position at the base of the shaft and

where the cable leaves the shaft.

f) Connect the cable connector to the rear of the control box.

Figure 5 - Control box in

hipmount bag

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Brak uwag

Minelab Musketeer ADVANTAGE Instrukcja Obsługi Strona 9